Smart Radio Code
Information
Smart Radio Codes
Instant Radio Codes & Decoding
Smart Car Stereo Decoding We are able to provide online Smart Radio Decoding / Codes for your car radio usually within seconds of payment simply by providing your Smart serial number via our online code search facility
Our Smart stereo decoding service covers Smart codes from manufacturers including :Pre 1999 Grundig Units Only (see workshop decoding for more)
 |
 |
Instant Smart Car Radio Code Search |  |
Where stated our Smart radio unlock codes are available Instantly online 24 hours a day, your radio code will not only be emailed to you immediatly but also the code shown on screen within seconds of processing your payment.
All Prices are shown including VAT after performing your initial code search and prior to entering any personal details or completing any order with us, Your details are not used for any purpose other than supplying your car radio code..
- Serial Location
- Removal Guides
Smart Serial Number Location Guide
Once you have successfully removed your car radio, Locate the serial
number by inspecting the top and right hand side of the radio.
An example of serial numbers commonly found on Smart Car Radios :
- GR0971Y1235456
- GM0203Y1245512
Before getting a code we recommend you first ensure your radio is not blocked. Simply turn the radio on, and try to enter the first digit of any code "ONLY THE FIRST DIGIT" If this is ok, immediatly turn the radio off. If you find however that you are unable to enter any digits, leave your radio powered up for 1 hour continuously to reset and unlock itself.
Whilst you have it removed
also check for any labels such as Repaired... Exchange.. and check that labels such as Warranty Void if Removed are in-tact.
If your radio is blocked, or the codes you have or we supply fail to work, we also offer a Workshop Decoding service, allowing us to reset or reprogramme the majority of radios which require a code.
Smart Radio Removal Guides
To locate your serial number, keyword2 first step is removing your radio from the vehicle. Unfortunatly this is an essential step for online decoding, as we provide the original Smart radio code for your radio based on the serial number, unlike Smart main dealers who use the vehicles registration number. This means are codes are more accurate, especially if its a second hand unit or been replaced at any stage in its life, either under warranty or by a third person.
- Simply insert the removal tools or equivalent into the two or four slots to in the corners of the Smart stereo as illustrated.
- Most require you to push the tools away from the radio which causes the clips to push into the radio and away from the dashboard to release
- The stereo should easily slide out without too much pressure.
Once you have successfully removed your car radio, Locate the serial number by inspecting the top and right hand side of the radio.
|
 |
 |
